Latest structural channel Tenders | Government structural channel Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38599398

23 Dec, 2024 NA

Delhi - Delhi

Tender For renovation of old existing damaged ms manual bar screen of inlet channel no.2 with new ss bar screen at zafrabad sps.

Central Government/Public Sector

CTN :38186563

18 Dec, 2024 NA

Kanpur - Uttar Pradesh

Tender For bid to ras corrigendum : supply of cable tray support system boltable lot 2 for panki tps 1x660mw up - single channel c1 , double channel c2 , cantilever arm ca1 -220mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , cantilever arm ca2 370mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , cantilever arm ca4 750mm arm - complete with all hardwares and accessories as per annexure-a of technical specification , c1 channel clamp cc1 - complete with all hardwares and accessories as per annexure-a of technical specification , c2 channel clamp cc2 - complete with all hardwares and accessories as per annexure-a of technical specification , angle fitting la1 - complete with all hardwares and accessories as per annexure-a of technical specification , z clamp for 100mm perforated tray tz1 - complete with all hardwares and accessories as per annexure-a of technical specification , base plate for single channel bp1 - complete with all hardwares and accessories as per annexure-a of technical specification , base plate for single channel bp2 - complete with all hardwares and accessories as per annexure-a of technical specification , tray fixing clamp tc1 - complete with all hardwares and accessories as per annexure-a of technical specification , ms galvanized hardware 1nos m6x35mm long pan head bolt 1 nos m6 spring nut 1 nos m6 plain washer , ms galvanized hardware 1nos m12x35mm long pan head bolt 1 nos m12 spring nut 1 nos m12 plain washer and 1 nos m12 spring washer , ms galvanized hardware 1nos m6x25mm long hex head bolt 2 nos m6 plain washer and 1 nos m6 spring washer , ms galvanized hardware 1nos m12x35mm long hex head bolt 2 nos m12 plain washer and 1 nos m12 spring washer , anchor bolt m10 with nut and washer , anchor bolt m12 with nut and washer

CTN :38602437

06 Jan, 2025 NA

Mumbai - Maharashtra

Tender For providing of repair and overhauling service - repair of two leonova diamond muti channel analyser; ms spm instrument india pvt ltd; yes; service provider premises

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

State Government

CTN :38580433

30 Dec, 2024 28.92 Lacs

Raichur - Karnataka

Tender For procurement of ms plate & ms channel for ytps

Central Government/Public Sector

CTN :38567777

01 Jan, 2025 NA

Multi City - Multi State

Tender For (supply)-supply of 2 kva ups, 160 - 260 volt, single phase 50 hz, spwm true on line double conversion ups with igbt module based inverters having transient surge protection, monitoring by lcd display of i/p & o/p voltage /current & battery voltage charging &discharging. battery with ms stand of standard l angle channel duly spray painted with two coats of epoxy based paint of powder coated. other technical specifications as per attached annexure- "a". on site warranty require minimum 5 years. note:(1)oem/authorized dealer proof of purchase & warranty certificate to be submitted along wi th the material supplied. make/brand: technomax (self) oem, hi-rel, apc or equivalent. note:(1) oem proof of purchase & oem warranty certificate to be submitted along with the material supplied. (2)delivery require at: . senior section engineer ( electric) power office store, near 11 kv substation, , traffic col ony, mahesana railway station, mahesana, gujarat-384001 ( mobile no: 9724093381). [ warranty period: 60 months after the date of delivery ]

Central Government/Public Sector

CTN :38582708

07 Jan, 2025 NA

Ankleshwar - Gujarat

Tender For part supply of signalling materials, releasing of ms trough, ms channel, s&t cables and transport to sr.section engineer's store and other signalling works in connection with the work of rehabilitation of br. no. 502 (narmada river) as per recommendations of third party audit report between kms 323/32 to 325/10 between stations ankleshwar and bharuch station of vadodara division.

CTN :38518576

31 Dec, 2024 NA

Amritsar - Punjab

Tender For supply of garari with 1 inch rod , pipe bearing 1 inch , ms square pipe 1 inch x 1 inch x 3mm , c channel 3 inch x 5mm , chain bullet , ms angles 1 inch x 3mm , ms angles 50x50x5mm , ms sheet 8 x 4 feet thickness 16 gauge , ms bolt and nut dia 14 mm size 5 inch , universal joint , lamp , 3 hp single phase motor starter

CTN :38526292

08 Jan, 2025 39.38 Crore

Jaipur - Rajasthan

Tender For segregation of 11 kv mixed feeders at tonk circles of jaipur discom of rajasthan state under revamped reforms-based and results linked distribution sector scheme (rdss) on turnkey basis against tn-583 - pcc poles, pcc pole 9 mtrs long (400 kg), pcc pole 9 mtrs long (200 kg), outdoor 11 kv o/d vcb kiosk complete with accessories including use of special tools, armoured cable of size 2c x 4 sq.mm. 1100 volts pvc insulated including supplyof ferrules, control cable of size 12c x 2.5 sq.mm. 1100 volts pvc insulated including supply of ferrules, overhead steel cored aluminum acsr dog[100sqmm(6+7) /(4.72+1.57)] conductor complete in all respect as per latest specification and drawing, overhead steel cored aluminum acsr rabbit conductor in all respect, earthing rod sets for s/s made with ms rod (galvanized ) 20 mm dia, 3 meter length with gi wire and clamp as per latest specification and drawing adopted & approved by nigam., ctpt structure set (galvanized), 11kv ct pt set(200/5 amp.), mip meter box for meter with ttb, go double break without eb isolator on existing bracket complete in all respect as required including hardware, nut, bolts & washer etc., 11kv ( with 9 x 24 kv post insulator ) 400 amp., horn gap sets on existing brackets in all respect as required including hardware nut & bolt & washer etc., 11kv ( with 6 x 24 kv post insulator ) 1 set=3 nos, supply of insulators, 11kv porcelain disc.insulators b&s type 45kn, hardware for 11kv disc insulator b&s type 45kn, composite polymer insulators, 11kv polymer disc.insulators t&c type 45kn, hardware for 11kv disc insulator t&c type 45kn, 11 kv composite polymer pin insulator complete in all respect, pg clamps for suitable acsr dog conductor, pg clamps for suitable acsr rabbit conductor, 11 kv danger plate of size 200 x 250 mm complete in all respect, supply of angle and channel, m.s channel 100x50x6 mm, m.s channel 75x40x6 mm, m.s. flat 50 x 6 mm (galvanized), 1.4 mtr channel bracket with clamp, supply of lightening arrestors, substation type 9kv, 10ka station class (1set=3 nos.) lightening arrestors., 11kv double pole line structure set for cut point complete on existing poles in all respect with clamp, as required made from m.s.channel 100 x 50 x ismc ( 9.56 kg. per mtr.) isa m.s.angle 65 x 65 x 6 mm, m.s.angle 50 x 50 x 6 mm and m.s.flat 50 x 6 mm (galvanized as per is), gi stay set (galvanized) complete (stay rod 16 mm dia,1.8 m long,anchor plate 300x300x4 mm,12 mm dia turn buckle) including stay clamps,, strain/guy insulator for stay set, 7/10 swg gi stay wire, gi wire 8swg, underground cable for working voltage of 11kv aluminium conductor (is 7098) cable xlpe armoured, under ground cable of size 3x185 sq.mm for 11 kv, g.i. pipe of 125 mm diameter, b-class (is:1239 mark), gi pipe for cable support at pole ( each 3.3 mtr ), cable for11 kv aluminum conductor xlpe armoured ht cable, xlpe 3x185 sq.mm h.s. on indoor type, xlpe 3x185 sq.mm h.s. on outdoor type, xlpe 3x185 sq.mm h.s.s.t. joint, 11.4 mtr. long lattice tower made of 50 x 50 x 6 mm m.s. angle with 50 x 6 mm m.s. flat for bracing as per nigam specification, 11kv cross arm with top hamper with clamps made of ms angle 65x65x6mm, clamp 50x6 mm, earth clamp 50x6 mm (galvanized), fixing of 11/0.4 kv substation structure set for three phase 63 kva transformer on double poles in all respect. weight (as per specification and drawing with go channel) approx=219.54 kg (all galvanized as per relevant is), 11 /0.4 kv al wound, three phase distribution transformer (completely self protected with provision of lt bushing box), 25 kva, 63 kva, 6.35/0.24kv s/s structure set for single phase transformer on single 9mtr, 400kg pcc pole in all respects., 11kv 100 amp drop out cum isolator with 3.0 amp. fuse & 12 kv post insulators., lt xlpe cable, size 4cx70 sq. mm, size 4cx120 sq. mm, aerial bunched cable, aerial bunched cable 3cx25+1x25 sqmm, aerial bunched cable 3cx50+1x35 sqmm, lt distribution pillar

Structural Channel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector